Star Line Thermal/Dot Printer Specifications page 31

ESC _ n
[Name] Specify/cancel upperline
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function] Specifies/cancels upperline according to n value.
n
0, 48 Cancels upperline
1, 49 Specifies upperline
Upperlines are not applied to horizontal tabs and to specified horizontal direction positions.
This command is valid for ANK characters and Japanese characters and is invalid for IBM blocks.
Upperlines are valid for white/black inversion.
<Thermal>
Upperlines are composed of 2 dot lines.
When character expansion is specified, upperlines are also expanded (when in double-high expan-
sion, upperlines are composed of four dots.)
<Slip>, <Validation>
Upperlines are applied to the 1
When double-wide expanded characters have been specified, the upperline is also expanded, but if
double-tall expanded characters have been selected, the upperline does not expand in the vertical
direction. It remains a one-dot line.
(Note) The settings using this command are valid for all stations and modes.
STAR Line Mode Command Specifications
ESC _ n
1B 5F n
27 95 n
: n = 0, 1, 48, 49
: n = 0, 1, 48, 49
: n = 0, 1, 48, 49
: n = 0 (Upperline cancelled)
: n = 0 (Upperline cancelled)
: n = 0 (Upperline cancelled)
dot of the character.
st
Upperline
3-19
Rev. 0.00