Star Line Thermal/Dot Printer Specifications page 97

ESC GS # m N n1 n2 n3 n4 LF NUL
[Name] Set memory switch
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function] Sends command to write after defining memory switch using the definition command specified by the
following classes.
Memory switch information defined by the command to write is written to the volatile memory.
When writing to the volatile memory by the command to write, the printer executes a reset.
By specifying N = 85 ("U"), it is possible to register any 16 bit data.
Definition data write and reset
Definition data write and reset and test print
Data Definition (Data Specification)
Data definition (set specified bit)
Data definition (clear specified bit)
Data Definition (initialize all data)
Definition data write, reset, test print, and dot adjustment
Definition data write, dot adjustment, test print, and reset
• m
• N
• n1 n2 n3 n4 : Specified data m = "+" → Specified Data
<Thermal>
When a function was specified that accompanies position adjustment (m = "K," "L"), this executes
only defined data write & reset, but does not execute the position adjustment.
<Validation>
When a function was specified that accompanies a self-print, and position adjustment
(m = "T," "K," "L"), this executes only defined data write & reset, but does not execute the self-print
or position adjustment.
STAR Line Mode Command Specifications
ESC GS # m
1B 1D 23 m
27 29 35 m
: m = 87, 84, 44, 43, 45, 64, 75, 76 (m = "W", "T", ",", "+", "-", "@", "K", "L")
48 ≤ n1 ≤ 57 ("0" ≤ n1 ≤ "9"), 65 ≤ n1 ≤ 70 ("A" ≤ n1 ≤ "F"), 97 ≤ n1 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ n2 ≤ 57 ("0" ≤ n2 ≤ "9"), 65 ≤ n2 ≤ 70 ("A" ≤ n2 ≤ "F"), 97 ≤ n2 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ n3 ≤ 57 ("0" ≤ n3 ≤ "9"), 65 ≤ n3 ≤ 70 ("A" ≤ n3 ≤ "F"), 97 ≤ n3 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ n4 ≤ 57 ("0" ≤ n4 ≤ "9"), 65 ≤ n4 ≤ 70 ("A" ≤ n4 ≤ "F"), 97 ≤ n4 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ N ≤ 57 ("0" ≤ N ≤ "9"), 65 ≤ N ≤ 72 ("A" ≤ N ≤ "F"), 97 ≤ N ≤ 104 ("a" ≤ N ≤ "h")
N = 85 (U) User defined region
: m = 87, 84, 44, 43, 45, 64, 75, 76 (m = "W", "T", ",", "+", "-", "@", "K", "L")
48 ≤ n1 ≤ 57 ("0" ≤ n1 ≤ "9"), 65 ≤ n1 ≤ 70 ("A" ≤ n1 ≤ "F"), 97 ≤ n1 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ n2 ≤ 57 ("0" ≤ n2 ≤ "9"), 65 ≤ n2 ≤ 70 ("A" ≤ n2 ≤ "F"), 97 ≤ n2 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ n3 ≤ 57 ("0" ≤ n3 ≤ "9"), 65 ≤ n3 ≤ 70 ("A" ≤ n3 ≤ "F"), 97 ≤ n3 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ n4 ≤ 57 ("0" ≤ n4 ≤ "9"), 65 ≤ n4 ≤ 70 ("A" ≤ n4 ≤ "F"), 97 ≤ n4 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ N ≤ 57 ("0" ≤ N ≤ "9"), 65 ≤ N ≤ 72 ("A" ≤ N ≤ "F"), 97 ≤ N ≤ 104 ("a" ≤ N ≤ "h")
N = 85 (U) User defined region
: m = 87, 84, 44, 43, 45, 64, 75, 76 (m = "W", "T", ",", "+", "-", "@", "K", "L")
48 ≤ n1 ≤ 57 ("0" ≤ n1 ≤ "9"), 65 ≤ n1 ≤ 70 ("A" ≤ n1 ≤ "F"), 97 ≤ n1 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ n2 ≤ 57 ("0" ≤ n2 ≤ "9"), 65 ≤ n2 ≤ 70 ("A" ≤ n2 ≤ "F"), 97 ≤ n2 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ n3 ≤ 57 ("0" ≤ n3 ≤ "9"), 65 ≤ n3 ≤ 70 ("A" ≤ n3 ≤ "F"), 97 ≤ n3 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ n4 ≤ 57 ("0" ≤ n4 ≤ "9"), 65 ≤ n4 ≤ 70 ("A" ≤ n4 ≤ "F"), 97 ≤ n4 ≤ 102 ("a" ≤ n1 ≤ "f")
48 ≤ N ≤ 57 ("0" ≤ N ≤ "9"), 65 ≤ N ≤ 72 ("A" ≤ N ≤ "F"), 97 ≤ N ≤ 104 ("a" ≤ N ≤ "h")
N = 85 (U) User defined region
: -
: -
: -
Function
: Mode Selection
: Memory switch number to specify
m = "+" → Bit number to set
m = "+" → Bit number to clear
N n1 n2 n3 n4 LF
N n1 n2 n3 n4 0A
N n1 n2 n3 n4 10
Class m
Write "W"
Write "T"
Definition ", "
Definition "+ "
Definition "-"
Definition "@"
3-85
NUL
00
0
N n1 n2 n3 n4
Fixed at "0" Fixed at "0000"
Fixed at "0" Fixed at "0000"
N n1 n2 n3 n4
N n1 n2 n3 n4
N n1 n2 n3 n4
Fixed at "0" Fixed at "0000"
Rev. 0.00