Print Mode - Star Line Thermal/Dot Printer Specifications

3-3-3)

Print mode

ESC E
[Name] Select emphasized printing
[Code] ASCII ESC
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function]
<Thermal> Specifies emphasized printing for ANK characters.
<Slip>, <Validation>
printed
(Note) The settings using this command are valid for all stations and modes.
STAR LIne Mode Command Specifications
E
1B 45
27 69
: -
: -
: -
: Emphasized printing cancelled.
: Emphasized printing cancelled.
: Emphasized printing cancelled.
IBM block ignores emphasized printing.
Specifies emphasized printing for subsequent data.
When in emphasized printing, data is printed in two passes.
This command is valid for ANK and Kanji characters (Kanji).
(* 2-pass Japanese characters are printed with four passes; 4-pass Japanese characters are
with 8 passes.)
When page mode is selected, the emphasized printing specification is in page units.
3-16
Rev. 0.00