Star Line Thermal/Dot Printer Specifications page 24

ESC W n
[Name] Specify/cancel expanded wide
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function] Specifies/cancels double wide for ANK characters and Kanji characters.
<Thermal>
n
0, 48 Cancel expanded wide
1, 49 Specifies 2x wide expansion
2, 50 Specifies 3x wide expansion
3, 51 Specifies 4x wide expansion
4, 52 Specifies 5x wide expansion
5, 53 Specifies 6x wide expansion
<Slip>, <Validation>
n
0, 48
1 ≤ n ≤ 5 49 ≤ n ≤ 53
When slip or validation is selected, and more than double is specified, printing is doubled for every
setting.
Setting more than triple is valid after switching to thermal.
(Note) The settings using this command are valid for all stations and modes.
STAR LIne Mode Command Specifications
ESC W n
1B 57 n
27 87 n
: 0 ≤ n ≤ 5, 48 ≤ n ≤ 53, ("0" ≤ n ≤ "5")
: 0 ≤ n ≤ 5, 48 ≤ n ≤ 53, ("0" ≤ n ≤ "5")
: 0 ≤ n ≤ 5, 48 ≤ n ≤ 53, ("0" ≤ n ≤ "5")
: n = 0 (Double wide cancelled)
: n = 0 (Double wide cancelled)
: n = 0 (Double wide cancelled)
Cancels double wide expanded printing
Specifies double wide expanded printing
Expanded wide
Function
3-12
Rev. 0.00