Table of Contents
Advertisement
STAR mode
6-1. Control Codes Used in Character Setting
Control codes
<ESC> "R" n
<ESC> "M"
<ESC> "P"
<SO>
<SI>
<DC4>
<ESC> "W" "1"
<ESC> "W" <1>
<ESC> "W" "0"
<ESC> "W" <0>
6-2. Control Codes Used in Print Mode Setting
Control codes
<ESC> "4"
<ESC> "5"
<ESC> "E"
<ESC> "F"
6-3. Control Codes Used in Line Spacing
Control codes
<LF>
<CR>
<ESC> "a" n
6. Control Codes
Hexadecimal codes Function
1B 52 n
Select international character set. Default is accord-
ing to the dip switch settings 3, 4 and 5.
1B 4D
Select 7
setting)
1B 50
Select 9 7 (Half dots) character size
0E
Select expanded character mode
0F
Cancel expanded character mode
(Default setting)
14
Cancel expanded character mode
(Default setting)
1B 57 31
Select expanded character mode
1B 57 01
1B 57 30
Cancel expanded character mode
1B 57 00
(Default setting)
Hexadecimal codes Function
1B 34
Red color print selection (enable for SP216)
1B 35
Red color print deselection (enable for SP216) (De-
fault setting)
1B 45
Emphasized print mode selection
1B 46
Emphasized print mode deselection (Default set-
ting)
Hexadecimal codes Function
0A
Line feed
0D
Line feed (same as LF)
1B 61 n
Feed paper n lines
– 19 –
7 (Half dots) character size (Default
Advertisement
Table of Contents
