Table of Contents
Advertisement
SI
[Name]
Select upside-down printing
[Code]
ASCII
Hexadecimal
Decimal
[Defined Area]
Thermal
Slip
Validation
[Initial Value]
Thermal
Slip
Validation
[Function]
Specifies upside-down printing
This command is enabled only when at the top of the line.
Upside down and right-side up characters cannot both exist in the same line.
This command is enabled for following.
• ANK characters
• Kanji characters
• Bit images
• Logos
• Bar codes
<Slip>, <Validation>
When page mode is selected, only setting is valid
Setting is valid after switching to line mode.
(Note) The settings by this command are valid for all stations.
DC2
[Name]
Cancel upside-down printing
[Code]
ASCII
Hexadecimal
Decimal
[Defined Area]
Thermal
Slip
Validation
[Initial Value]
Thermal
Slip
Validation
[Function]
Cancels upside-down printing
This command is enabled only when at the top of the line.
(Note) The settings by this command are valid for all stations.
STAR Line Mode Command Specifications
SI
0F
15
:
-
:
-
:
-
:
Upside-down printing cancelled
:
Upside-down printing cancelled
:
Upside-down printing cancelled
DC2
12
18
:
-
:
-
:
-
:
Upside-down printing cancelled
:
Upside-down printing cancelled
:
Upside-down printing cancelled
3-23
Rev. 0.00
Advertisement
Table of Contents
