Star Line Thermal/Dot Printer Specifications page 123

ESC RS C n
[Name] Select/cancel 2-color print mode
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function]
<Thermal>
n
0, 48 Single Color Mode
1, 49 2-color Mode
16 Low-power Consumption Mode
32 Double Resolution Mode
• This command is ignored when the low-power consumption mode is selected by the DIP switches.
<Slip>, <Validation>
Only setting is valid
Setting is valid after switching to thermal.
STAR Line Mode Command Specifications
ESC RS C n
1B 1E 43 n
27 30 67 n
: 0 ≤ n ≤ 2, 48 ≤ n ≤ 50 ("0" ≤ n ≤ "2"), n = 16, n =32
: -
: -
: n = 0, 48
: -
: -
Print Mode Specification
• The specification of this command is not cleared by ESC @ CAN.
• Prints data in line buffer, if unprinted data exists in the line buffer.
• This command is processed after quitting the current print.
• Commands that select the same mode are ignored in the currently selected mode.
3-111
Rev. 0.00