Star Line Thermal/Dot Printer Specifications page 71

• n3: Bar Code Mode Selection
n3
UPC-E, UPC-A, JAN/EAN8
JAN/EAN13, Code128, Code93
1, 49 Minimum module 2 dots
2, 50 Minimum module 3 dots
3, 51 Minimum module 4 dots
4, 52 ---
5, 53 ---
6, 54 ---
7, 55 ---
8, 56 ---
9, 57 ---
• n4:
Spec. 1: When the height of the bar code is more than the form feed amount, the form feed amount
is automatically doubled.
Spec. 2: Line feed according to (bar code height + under-bar characters)
• k (bar code data count), d (bar code data)
Bar Codes Types
UPC-E
UPC-A
JAN/EAN8
JAN/EAN13
Code39
ITF
Code128
Code93
NW-7
• UPC-E: k = 11 (or 12)
The 12
Command is ignored if the data cannot be shortened. Data conversion to rectangles is automatic.
• UPC-A: k = 11 (or 12)
The 12
• JAN/EAN -8: k = 7 (or 8)
The 8
th
• JAN/EAN -13: k = 12 (or 13)
The 13
• CODE39: k is freely set, and maximum value differs according to the mode.
Start and stop codes (*) are automatically included.
• ITF: k is freely set, and maximum value differs according to the mode.
If the data is an odd line, 0 data is automatically appended to the top.
• CODE128: k is freely set, and maximum value differs according to the mode and print character
type.
Check character is automatically appended.
• CODE93: k is freely set, and maximum value differs according to the mode and print character
type.
The start/stop code (□) is automatically appended.
• NW7: k is freely set, and maximum value differs according to the mode and print character type.
Both start/stop codes are included in the data (but not automatically applied).
STAR Line Mode Command Specifications
Bar code height (dot count)
Defined area of k
11 ≤ k ≤ 12
11 ≤ k ≤ 12
7 ≤ k ≤ 8
12 ≤ k ≤ 13
1 ≤ k
1 ≤ k
For odd numbers
0 data is automatically added
to the top.
1 ≤ k
1 ≤ k
1 ≤ k
check digit is automatically applied, so it is ignored even if specified.
th
check digit is automatically applied, so it is ignored even if specified.
th
check digit is automatically applied, so it is ignored even if specified.
check digit cannot be automatically applied, so it is ignored even if specified.
th
Bar Codes Types
Code39, NW-7
Narrow : Wide = 2: 6 dots
Narrow : Wide = 3: 9 dots
Narrow : Wide = 4:12 dots
Narrow : Wide = 2: 5 dots
Narrow : Wide = 3: 8 dots
Narrow : Wide = 4:10 dots
Narrow : Wide = 2: 4 dots
Narrow : Wide = 3: 6 dots
Narrow : Wide = 4: 8 dots
Defined area of d
48 ≤ d ≤ 57 ("0" ≤ d ≤ "9")
48 ≤ d ≤ 57 ("0" ≤ d ≤ "9")
48 ≤ d ≤ 57 ("0" ≤ d ≤ "9")
48 ≤ d ≤ 57 ("0" ≤ d ≤ "9")
48 ≤ d ≤ 57 ("0" ≤ d ≤ "9"), 65 ≤ d ≤ 90 ("A" ≤ d ≤ "Z")
32, 36, 37, 43, 45, 46, 47(SP, "$", "%", "+", "-", ".", "/")
48 ≤ d ≤ 57 ("0" ≤ d ≤ "9")
0 ≤ d ≤ 127
0 ≤ d ≤ 127
48 ≤ d ≤ 57 ("0" ≤ d ≤ "9"), 65 ≤ d ≤ 68 ("A" ≤ d ≤ "D")
36, 43, 45, 46, 47, 58 ("$", "+", "-", ".", "/", ":")
97, 98, 99, 100 ("a," "b," "c," "d")
3-59
ITF
Narrow : Wide = 2: 5 dots
Narrow : Wide = 4:10 dots
Narrow : Wide = 6:15 dots
Narrow : Wide = 2: 4 dots
Narrow : Wide = 4: 8 dots
Narrow : Wide = 6:12 dots
Narrow : Wide = 2: 6 dots
Narrow : Wide = 3: 9 dots
Narrow : Wide = 4:12 dots
Rev. 0.00