Table of Contents
Advertisement
(3)
Printer Status
Printer status is the status of the printer sent from the 3
For the printer status, (the number of bytes added in Header -1 minus two) is returned.
Printer status is always updated for new information. (No log exists.)
The following shows the composition of the status.
<Printer status 1 Printer status (Third Byte)>
Bit
Contents
7
Fixed at "0"
6
OFFLINE By Switch Input
5
Cover Status
4
Fixed at "0"
3
ONLINE/OFFLINE Status
2
Compulsion SW
1
ETB Command
0
Fixed at "0"
• ETB Command
Cleared when received at the host (by clearing bit 1 to 0, automatic status is not targeted to occur).
<Printer status 2 Error Information (Fourth Byte)>
Bit
Contents
7
Fixed at "0"
Stopped by high head
6
temperature
5
Non-recoverable Error
4
Fixed at "0"
3
Auto-cutter Error
2
Mechanical Error
1
Not Used (Fixed at "0")
0
Fixed at "0"
<Printer status 3 Error Information (Fifth Byte)>
Bit
Contents
7
Fixed at "0"
6
Reception Buffer Overflow
Command Error (in Page
5
Mode)
4
Fixed at "0"
3
BM Error
2
Presenter Paper Jam Error
1
Head Up Error
0
Fixed at "0"
• Reception Buffer Overflow
Cleared to 0 when returned to the host.
• Command Error (in Page Mode)
Command errors cleared to 0 when returned to the host.
• BM Error
On models that use a common PE and BM sensor, if a continuous error is detected beyond a determined amount, it
indicates not a black mark error, but a paper out error.
STAR LIne Mode Command Specifications
byte of the automatic status.
rd
Status
"0"
No
Occurs
Closed
Open
ONLINE
OFFLINE
Open
Closed
Not Executed
Executed
Status
"0"
Not stopped
Stopped
No
Yes
No
Yes
No
Yes
Status
"0"
Does not occur
Occurs
No
Yes
No
Yes
No
Yes
No
Yes
5-9
"1"
HSP7000
-
-
×
○
-
-
○
○
○
-
-
"1"
HSP7000
-
-
○
○
-
-
○
○
-
-
-
"1"
HSP7000
-
-
○
x
-
-
○
×
×
-
-
Rev. 0.00
By model
By model
By model
Advertisement
Table of Contents
