Star Line Thermal/Dot Printer Specifications page 103

ESC * r A
[Name] Enter raster mode
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function]
<Thermal>
Enters raster mode.
This command is ignored when in the raster mode.
The following shows the details regard processing of this command.
(1)
(2)
(3)
(4)
(*) Not initialized when raster mode is entered only when using raster data print color settings.
<Slip>, <Validation>
Use prohibited.
STAR Line Mode Command Specifications
ESC * r A
1B 2A 72 41
27 42 114 65
: -
: -
: -
: -
: -
: -
Reception of this command.
All data remaining in the reception buffer and image buffer is printed equivalent to the FF
command.
Initialize raster mode
Enter raster mode
When entering raster mode, raster mode is initialized.
The following shows the contents of the initialization.
• Raster page length setting (ESC * r P n NUL)
• Raster print quality setting (ESC * Q n NUL)
• Raster left margin setting (ESC * r m l n NUL)
• Raster right margin setting (ESC * r m r n NUL)
• Raster EOT mode setting (ESC FF EOT)
• Raster FF mode setting (ESC FF NUL)
• Clear raster image buffer
3-91
Rev. 0.00