Table of Contents
Advertisement
3-6)
2-Color Printing Command Details
The following commands control 2-color printing functions.
The following commands are effective only when using a model handling 2-color printing.
ESC RS c n
[Name]
Set print color in 2-color print mode
[Code]
ASCII
Hexadecimal
Decimal
[Defined Area]
Thermal
Slip
Validation
[Initial Value]
Thermal
Slip
Validation
[Function]
<Thermal>
Specifies print color in 2 color print mode.
This command is ignored when not in the 2-color print mode.
Specifies black for the print color when in 2-color print mode.
The specification of this command is cleared only when the printer is reset.
The specification of this command is not cleared by ESC @ CAN.
However, print color is initialized to black by the ESC @ and CAN only when in the compatible 2-
color print mode.
n
0, 48
Black
1, 49
Red
<Slip>, <Validation>
Only setting is valid
Setting is valid after switching to thermal.
STAR LIne Mode Command Specifications
ESC
RS
c
n
1B
1E
63
n
27
30
99
n
:
0 ≤ n ≤ 1, 48 ≤ n ≤ 49, ("0" ≤ n ≤ "1")
:
-
:
-
:
n = 0, 48 (When in 2-color print mode)
:
-
:
-
Specifies 2-color print mode color
3-110
Rev. 0.00
Advertisement
Table of Contents
