Star Line Thermal/Dot Printer Specifications page 84

ESC RS E n
[Name] Initialize ASB ETB counter, and ETB status.
[Code] ASCII
Hexadecimal
Decimal
[Defined Area] Thermal
Slip
Validation
[Initial Value] Thermal
Slip
Validation
[Function]
Clears the ASB ETB counter to zero and clears the ETB status.
However, when clearing the ETB counter to zero using this command, ASB status is not transmitted.
The ETB counter and ETB status are initialized by the following command in addition to this com-
mand.
• Cancel print data and initialize commands <CAN>
STAR LIne Mode Command Specifications
ESC RS E n
1B 1E 45 n
27 30 69 n
: n = 0, 48 ("0")
: n = 0, 48 ("0")
: n = 0, 48 ("0")
: ASB ETB counter = 0
: ASB ETB counter = 0
: ASB ETB counter = 0
3-72
Rev. 0.00