Table of Contents
Advertisement
3-3-14) Status
ESC RS a n
[Name]
Set status transmission conditions
[Code]
ASCII
Hexadecimal
Decimal
[Defined Area]
Thermal
Slip
Validation
[Initial Value]
Thermal
Slip
Validation
[Function]
Sets the status transmission conditions. See Appendix 2 for details regarding ASB status.
This command is effective only on printers that have an interface capable of bi-directional data
communications.
When using serial, parallel or USB (vendor class), use is possible.
The command is ignored (set to enable auto-status) when using Ethernet or wireless LAN.
Settings of this command are unaffected by the ESC @ (command initialization) command.
See each printer's product specifications manual for details on the memory switch settings.
(Note) The settings using this command are valid for all stations and modes.
STAR Line Mode Command Specifications
ESC
RS
a
n
1B
1E
61
n
27
30
97
n
:
0 ≤ n ≤ 3, 48 ≤ n ≤ 51, ("0" ≤ n ≤ "51")
:
0 ≤ n ≤ 3, 48 ≤ n ≤ 51, ("0" ≤ n ≤ "51")
:
0 ≤ n ≤ 3, 48 ≤ n ≤ 51, ("0" ≤ n ≤ "51")
:
DIPS switches/Memory switch setting
:
DIPS switches/Memory switch setting
:
DIPS switches/Memory switch setting
3-69
Rev. 0.00
Advertisement
Table of Contents
