2)
Simple Auto Logo Function
Preset the simple Auto Logo function, and execute the following operations with the printing cut command under the
existing system as a trigger.
(1) Simple Auto Logo function starts up using the existing system cut command as a trigger.
(2) Center alignment command process
(3) Execute printing of logo 2.
(4) Paper is fed to cutting position, then a partial cut is executed.
(5) Execute printing of logo 1.
(6) Recover position alignment command to setting to before execution of simple Auto Logo
With the simple Auto Logo function the logo number of the logo to print is predetermined.
********************
MCDONALD'S
********************
1.
$2.00
CHEESEBURGER
2.COKE
$1.00
------------------------- ----------
TOTAL
$3.00
Current System Print Data
STAR Line Mode Command Specifications
1. AutoLogo triggered by cut command
2. Center alignment
3. Logo2 is printed
4. Paper is fed to cutting position and
partially cut
5. Logo1 is printed.
6. Returns to position alignment
Header
********************
MCDONALD'S
********************
1.CHEESEBURGER
2.COKE
-----------------------------------
TOTAL
Footer
Header
********************
MCDONALD'S
3-123
Rev. 0.00
Logo1
$2.00
$1.00
Current System
Print Data
$3.00
Logo2
Logo1