System Parameters - Roland R1000 Series Manual

Start-up
7.7

System parameters

The general adjustments are specified in the system parameters.
For accessing, select the "system parameter configuration" mode and confirm with ENTER.
System parameter 1: Setting the dialogue language.
system parameter
language: english
Fig. 63: Selecting the dialogue language
Possible choices:
• English
• German
• Italian
• French
• Spanish
System parameter 2: Selecting the dimensions for the display (mm / inch).
system parameter
display in:
Fig. 64: Selecting the dimension for the display
When changing the measurement dimensions, then the sheet metal thicknesses of the stored
program parameters are also converted into the new dimension. In addition, %mm and %inch are
also available (not for 4P version).
System parameter 3: Selecting the dimensions for output via fieldbus (mm / inch).
system parameter
bus readout:
Fig. 65: Selecting the dimensions for the fieldbus output
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
114
Double Sheet Detector R1000 series UDK20
with integrated fieldbus interface
Note The selected system configuration should be documented in the form
"System configuration" in the chapter "13.2. This information is required in
case a system needs to be exchanged.
1
2
mm
3
mm
Manual
B0048191 / Rev. 1.5