Roland R1000 Series Manual page 112

Start-up
Then the following message appears:
program par.
TI-value: 0.97mm
Fig. 61: Teach-In measurement value
This measured value can be accepted or changed, e.g. to calibrate the control unit.
After the Teach-In has been completed the following message appears:
program par.
Teach-In: ok
Fig. 62: Teach-In successfully completed
Entering the information for the selected measuring program is now completed.
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
112
Double Sheet Detector R1000 series UDK20
with integrated fieldbus interface
8
8
Attention For sequence 1+2 the Teach-In is separately performed for sensor 1
and 2.
Manual
B0048191 / Rev. 1.5