Technical records
10.6
Short description RPP-XP software
The RPP-XP software serves the purpose of creating a data backup onto an external PC and
rewriting it back onto a ROLAND system.
In case of a defective control unit this backup can be transferred to another control unit.
The instructions of the programs can be accessed via the help function after installation (pdf).
Hardware requirements
•
C-version of a ROLAND unit series R1000, such as E10, E20, I10, UDK10, UDK20 or
Fieldbus units
•
PC with Windows® 95 / 98 / 2000 / NT / XP / Vista / 7 installed and a free serial interface or
USB, set at COM1 ... COM10
•
null modem cable for the serial interface, or USB-serial adapter
•
Your installation directory must have write permissions for later users.
•
Switch the device to backup mode (For details refer to chapter 7.8).
10.7
Spare parts
ROLAND ELECTRONIC recommends to inventory the following spare parts (minimum):
•
One sensor
•
A set of cables
Whether a spare control unit should be kept in inventory has to be decided on individual basis.
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
138
Double Sheet Detector R1000 series UDK20
with integrated fieldbus interface
Manual
B0048191 / Rev. 1.5