Roland R1000 Series Manual page 121

B0048191 / Rev. 1.5
system parameter
P12 N=2.12mm
Fig. 88: Indicating the nominal thickness for the program
Here the nominal thickness for this program is shown (here: program 12).
With the ENTER key and UP/ DOWN keys all programs can be polled / indicated.
The ENTER key will exit the section.
The UP key leads to the following menu item:
system parameter
P12 FKT=1.112
Fig. 89: Indicating the factor for the program, investigated on Teach-In
Here the factor (2PW units: both factors) for this program, investigated on Teach-In, is shown
(here: program 12).
With the ENTER key and UP/ DOWN keys all programs can be polled / indicated.
The ENTER key will exit the section.
The UP key leads to the following menu item:
system parameter
P12 EXIT
Fig. 90: Exiting the factor diagnosis section
The ENTER key will exit the factor diagnostics.
System parameter 13: Equipment diagnostics (W-diagnosis)
system parameter
W-diagnostics
Fig. 91: W-diagnostics
The ENTER key leads to the following menu item:
system parameter
EC: 24-32mS/m
Fig. 92: Setting the conductivity range fort he diagnosis
Here the conductivity range for the diagnosis is set.
• Extra: = slightly magnetical NF material
• FE = magnetical steel
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone +49 (0)7236-9392-0 · Fax +49 (0)7236-9392-33
Double Sheet Detector R1000 series UDK20
with integrated fieldbus interface
19
19
19
20
Note The settings of the current program will be taken over as default settings.
20
Manual
Start-up
121