Clean The Sz-Rollers In The Registration Output Module With System Tray - Oce VarioPrint i Series Operation Manual

Clean the SZ-rollers in the registration output module with system tray

When the SZ-rollers in the registration output module are polluted, image quality and registration
problems may occur.
[452] Location of the registration output module with system tray
Before you begin
You need the following items:
• Cleaning cloths (Alphawipe pads Texwipe TX1004)
• Bottle of process maintenance liquid (PML)
NOTE
• In order to keep your hands clean, it is advised to use nitrile gloves when you work with ink,
ColorGrip, or PML. For details see the related material safety data sheets. (
consumables on page
• When you spill any liquid, wipe up the drops with disposable towels and transfer the used
towels to a sealable container appropriate for disposal.
Procedure
Action
1 Open the front door of the registration output module.
2 Squeeze the green handles to
open the paper guide.
Clean the SZ-rollers in the registration output module with system tray
332)
VarioPrint i-series
Chapter 13 - Maintain the printer
4
379