Table of Contents
Advertisement
Define the default media of separator sheets
1. Open the Settings Editor and go to: [Preferences]→[Print job defaults].
[63] [Print job defaults] tab
2. Use the [Media of separator sheets] function to select the default media of the separator
sheets.
[64] Default media of separator sheets
3. Click [OK].
4. Use the [Separator sheets] function to select the sheet orientation of the separation sheets.
• [Short-edge feed]: separator sheets are delivered in the output tray with short-edge feed
direction.
• [Long-edge feed]: separator sheets are delivered in the output tray with long-edge feed
direction.
• [Automatic]: separator sheets are delivered in the output tray according to the tray defaults.
[65] Default orientation of separator sheets
5. Click [OK].
Define default use of special pages
Chapter 5 - Define defaults
73
Advertisement
Table of Contents
