Table of Contents
Advertisement
Clean the Z-sensors in the registration input module (Z2)
Action
4
1. Take five cleaning cloths and fold the cloths
in half.
2. Move the folded cloths over the lower sen-
sors three times.
5
Take five new cleaning cloths, fold the cloths in
half, and move the folded cloths over the upper
sensors three times.
6
Gently close the Z-sensor unit.
7
Use the green handle to close the paper guide.
8
Close the front door of the registration input module.
After you finish
Dispose the used cleaning cloths.
364
Chapter 13 - Maintain the printer
NOTE
You cannot easily access the lower Z-
sensors.
NOTE
You cannot easily access the upper Z-
sensors.
Advertisement
Table of Contents
