Oce VarioPrint i Series Operation Manual page 353

Action
2 Open the front cover high ca-
pacity stacker 1 or 2.
3 Rotate the flip wheel to ac-
cess to the flip rings.
4 Put a large-format sheet on
the stack tray, so that loose
flip rings cannot fall into the
high capacity stacker.
5 Remove the flip rings one by
one.
6 Place the new flip rings one
by one. Ensure that the flip
rings can rotate freely.
7 Remove the sheet from the stack tray.
8 Close the front cover.
Replace the flip rings of the high capacity stacker
Chapter 13 - Maintain the printer 353