Table of Contents
Advertisement
Create a color validation test
You can create your own VarioPrint i-series color validation test to check the color reproduction
on selected media. Then you create a custom test printing condition. (
validation tests on page
1. Open the Settings Editor and go to: [Color]→[Color validation & verification].
[321] [Color validation & verification] tab
2. Click [Add].
[322] [Color validation tests] menu
3. Select the target chart from the [Color control strip] drop-down list.
[323] Add a color validation test
4. Select the evaluation mode from the [Evaluation mode] drop-down list. (
on page
5. Select the simulation profile from the [CMYK simulation profile] drop-down list.
Choose the profile that specifies a standard condition or a printer you want to simulate.
6. Use the [Export the CGATS report] check box to indicate if you want to export the results in a
CGATS report.
7. Select the first metric from the [Color metric 1] drop-down list. (
metrics on page
8. Determine how many quality levels you want to use for the metric.
9. Use the following fields to enter the tolerance level (in ΔE) that defines each quality level:
[Threshold level A], [Threshold level B],[Threshold level C],[Threshold level D],[Threshold
level E].
10. Follow the previous steps to define the other metrics and quality levels you want to add to the
test.
11. Click [OK].
247,
Learn about color differences on page
248)
437)
Create a color validation test
Learn about color
250)
Evaluation methods
Overview of color validation
Chapter 9 - Print what you expect
257
Advertisement
Table of Contents
