Table of Contents
Advertisement
Perform a color validation test
Perform a color validation test
VarioPrint i-series color validation tests provide an objective method to check the color
reproduction of the printer on the selected media. (
page
247)
You perform the test with media that have been calibrated just before the color validation.
Calibrate a media family on page
(
Print cleaning sheets before the test charts
1. Open the Settings Editor and go to: [Color]→[Color validation & verification].
[315] [Color validation & verification] tab
2. Click [Configure].
[316] [Color validation tests] menu
3. Use the [Print cleaning sheets before test charts] function to indicate if you want to print
cleaning sheets before the charts are printed.
[317] Configure color validation
Print the target charts
1. Calibrate the media family of the target media. (
2. Load and assign approximately 10 sheets of the target media in one of the paper trays.
3. Touch [System]→[Media].
4. Select the target media.
5. Touch [Validate].
254
Chapter 9 - Print what you expect
Learn about color validation tests on
225) The target charts are printed on these media.
Calibrate a media family on page
225)
Advertisement
Table of Contents
