Replace A Tissue Ribbon - Oce VarioPrint i Series Operation Manual

Replace a tissue ribbon

Replace a tissue ribbon
Printheads are automatically cleaned with wet tissue ribbon according to a cleaning scheme. A
roll of tissue ribbon is enclosed in a cassette. For each ink color and the ColorGrip liquid two
cassettes (labeled L and R) with ribbon are available. (
page 237)
When one or more tissue ribbons are nearly used up, the dashboard indicates that the tissue
cassettes must be replaced. (
Replace the used tissue ribbons soon after you replace the tissue cassettes, so that you keep a
stock of cassettes with new tissue ribbons.
[443] Tissue cassette
NOTE
In order to keep your hands clean, it is advised to use nitrile gloves when you work with ink,
ColorGrip, or PML. For details see the related material safety data sheets. (
consumables on page
Before you begin
• You need cleaning cloths (Alphawipe pads Texwipe TX1004).
• You need a bottle with process maintenance liquid (PML).
• You need a large sheet of paper.
• Take the cardboard box or the unwind tool with tissue cassettes with tissue ribbons that are
used up.
Procedure
Action
1 Cut, unwind, and remove the used tissue ribbon
from the holders in the tissue cassette. When you
use the unwind tool you can unwind all tissue rib-
bons at the same time.
356 Chapter 13 - Maintain the printer
Replace the tissue cassettes on page
332)
Learn about printhead maintenance on
354)
VarioPrint i-series
4