Read tolerance levels for color validation tests
Read tolerance levels for color validation tests
Evaluation tests can have different quality levels based on different tolerance levels for the same
Tolerance levels on page
metric. (
You cannot change the metrics and tolerance levels for the pre-defined FOGRA and IDEAlliance
color validation tests. The profile accuracy test also has fixed tolerance levels that are not
editable.
1. Open the Settings Editor and go to: [Color]→[Color validation & verification].
[324] [Color validation & verification] tab
2. Select the test.
[325] [Color validation tests] menu
3. Click [Edit].
4. Read the metrics and tolerance levels.
[326] Edit a color validation test
258
Chapter 9 - Print what you expect
249)