Table of Contents
Advertisement
Action
7
Manually move the print belt to the right-hand side
and check if the print belt is dirty.
• If the print belt is clean, continue with step 11.
• If the print belt is dirty, continue with step 8.
8
Place a large sheet of paper (A3 / 11" x 17" or larger)
underneath the print belt to collect dirt.
9
1. Use a dry cleaning cloth to clean the print belt surface.
2. Manually move the print belt to the right-hand side to clean the entire surface.
3. If the print belt is still dirty, moisten a new cleaning cloth with PML and clean the print
belt surface again.
10
Remove the sheet underneath the print belt.
11
Close the upper and lower front doors of the print module.
12
Touch [Confirm] on the control panel.
After you finish
Dispose the used cleaning cloths.
Remove sheets from the printheads
Chapter 14 - Problem Solving
409
Advertisement
Table of Contents
