Table of Contents
Advertisement
Validate a transaction setup
Validate a transaction setup
What is transaction setup validation
When you have defined, changed, or imported a transaction setup, you can validate the
transaction setup to check its media definitions.
When you use the [Validate] option, the printer checks for each tray if the media definition is
valid. It depends on the tray selection mode ([Tray to media] or [Tray to tray]) how the media
elements are checked. (
mapping on page
Validation in [Tray to media] mode
The printer checks the following:
• The media set per tray are available in the media catalog. (
on page
268)
• The media print mode set per tray is defined for the media family of the media. (
media print mode on page
Validation in [Tray to tray] mode
The printer checks the following:
• The media families of the assigned media in the paper trays must have the IPDS media print
Define a media print mode on page
mode. (
trays on page
Validate a transaction setup
1. Open the Settings Editor and go to: [Transaction printing]→[Transaction setups].
2. Click [Validate].
The transaction setup is opened so you can adjust its attributes.
[147] [Transaction setups] menu
3. The report appears.
4. Read the report. (
5. Click [OK] to close the report.
124
Chapter 7 - Transaction printing
Define the tray-to-media mapping on page
119)
277)
89)
Read the transaction setup validation report on page
118,
Define media in the media catalog
Assign media from media catalog to paper
277,
Define the tray-to-tray
Define a
126)
Advertisement
Table of Contents
