Oce VarioPrint i Series Operation Manual page 388

Clean the SZ-rollers in the high capacity stacker
Action
7 1. Wait for about 10 seconds to let the roll-
ers absorb the PML.
2. Clean the upper and lower pair of roll-
ers. Rub the moist cloth across the roll-
ers from the side until all pollution is
gone.
Turn the rollers to clean the complete
surface.
8 Close the registration unit.
9 Place the registration unit back. The arrows
must be on top.
10
Connect the flat cable and close the two re-
taining clips.
388 Chapter 13 - Maintain the printer
NOTE
The color of the roller can change
but this cannot damage the print-
er.
IMPORTANT
Do not twist the flat cable.
4