Adjust media registration parameters
Adjust media registration parameters
In some special situations, it is necessary to adjust the registration parameters belonging to the
Define media optimization parameters on page
media. (
Before you change any registration parameter, check the printed registration chart (
media registration on page
IMPORTANT
The values of all media settings are factory defined and exactly match the properties of the
media and the VarioPrint i-series printer. Only change these default values when you understand
what these settings mean and do.
1. Open the Settings Editor and go to: [Media]→[Media].
[482] [Media] menu
2. Select the media.
3. Click [Optimize].
[483] [Media catalog] menu
4. Adjust the media registration parameters. (
[484] Media registration parameters
5. Click [OK].
418
Chapter 14 - Problem Solving
414) and clean the S and SZ rollers (
Media registration parameters on page
272)
Clean printer parts on page
Perform
359).
419)