Table of Contents
Advertisement
Replace the ColorGrip waste container
The dashboard indicates when you must prepare the replacement of a full ColorGrip waste
Filling levels of supplies and waste on page
container. (
The ColorGrip waste container is full.
The ColorGrip waste container is full and the buffer is nearly full.
Both the ColorGrip waste container and buffer are full. An action-required screen ap-
pears and shows how to replace the full container.
[438] Location of the waste compartment
NOTE
• In order to keep your hands clean, it is advised to use nitrile gloves when you work with ink,
ColorGrip, or PML. For details see the related material safety data sheets. (
consumables on page
• Keep full containers tightly closed.
• When you spill any liquid, wipe up the drops with disposable towels and transfer the used
towels to a sealable container appropriate for disposal.
Before you begin
• Take an empty container, labeled as waste container, and place the container next to the waste
compartment.
Procedure
Action
1
Use both hands to carefully open the door of the waste compartment.
332)
Replace the ColorGrip waste container
443)
VarioPrint i-series
Chapter 13 - Maintain the printer
4
345
Advertisement
Table of Contents
