Clean The Glue Cleaning Rollers - Oce VarioPrint 6000 Ultra Line User Manual

Clean the glue cleaning rollers

Introduction
This procedure is only intended for key operators who received the special maintenance
training.
When to do
Certain media may contain substances (for example ink or wax) that pollute the machine.
This pollution can lead to decreased image quality and/or machine damage. Depending
on the amount of substances, you must clean the glue cleaning rollers at a certain interval.
Consult your service technician if you need advise.
Before you begin
Make sure that the machine is switched off.
Required tool
Service key (supplied with the machine)
Socket wrench 10 (supplied with the machine)
Heat-resistant gloves (supplied with the machine)
Offset pads (supplied with the machine)
Large sheets of paper to protect the OPC
Océ Cleaner P (supplied with the machine)
Océ Cleaner K
Océ Cleaner T
Caution:
Hot area. Use heat-resistant gloves.
Open the doors and covers
Use socket wrench 10 to loosen the bolt of the front doors (1).
1.
Clean the glue cleaning rollers
Chapter 3 - Maintenance tasks - Level 2 63