Table of Contents
Advertisement
Replace the ColorGrip waste container
Action
2
Press the connector of the full container and dis-
connect the supply tube from the cap.
3
Take out the full container.
4
Unscrew the caps of the full and empty container, swap the caps and fasten them.
5
Place the empty container in the tray.
6
Press the connector and carefully connect the
supply tube to the cap of the empty container.
7
Carefully close the door of the waste compartment.
After you finish
Dispose the container according to the safety regulations delivered with your product.
346
Chapter 13 - Maintain the printer
NOTE
The supply tube can drip liquid. Use
cleaning cloths to clean the tube.
Advertisement
Table of Contents
