Replace A Waste Ink Bottle - Oce CS6407 Basic Operation Manual

Replace a waste ink bottle

CAUTION
- Do not replace the waste ink bottle during printing.
- Replace the waste ink bottle carefully not to bump your head on the Printer upper part.
- Always use both hands to carefully remove and carry an SIIT waste ink
bottle to prevent the waste ink spilt on the Printer or on the fl oor.
- You are recommended to wear gloves when handling waste ink bottles.
1
2
3
84
Océ 6407 Basic Operation Guide
Tube
Lever
Splash guard
Waste ink bottle
Slide the lever up and lift the splash guard
suffi ciently to remove the waste ink bottle.
The ink drips from the tube. Leave it for a while.
Carefully pull out the full waste ink bottle,
taking care not to spill any on the printer or on
the fl oor.
Securely close the cap on the waste ink bottle.
Wipe off the spilt ink in the waste ink bottle
unit.