Replace The Residual Toner Container - Oce PlotWave 340 Operation Manual

Replace the residual toner container

Replace the residual toner container
Introduction
A sensor detects when the residual toner container is full. When the container is full, the printer
stops printing and a message appears on the user panel: [The residual toner container is full or
not installed.] [Place the empty container.] Replace the container to continue printing.
NOTE
It is advised to replace the residual toner container every time you refill a complete toner bottle.
IMPORTANT
Do not replace the container during the printing process. You can replace the container when the
printer is on.
Procedure
1.
Open the residual toner compartment.
2.
Remove the full residual toner container.
278 Chapter 5 - Maintain the Printing System