Inputs - Parker Compax3 Series Operating Instructions Manual

Status values
6.6

Inputs

88
D/A monitor output
not possible
Remark:
Phase current V, Output as peak value
Actual value after oversampling
Status of target jerk setpoint encoder
Available in technology function:
Unit of
Unit/s³
measurement
D/A monitor output
not possible
Remark:
Target jerk of setpoint encoder
Stated in user units
Output value of the fine interpolator
Status of effective current and jerk forward feed
Available in technology function:
Unit of
mA
measurement
D/A monitor output
not possible
Remark:
Forward feed of effective current and jerk
Stated in amperes RMS
after filter
Status of analog input 0
Available in technology function:
Unit of
V
measurement
D/A monitor output
possible
Remark:
Analog input 0
Analog input on plug X11/9 and X11/11
Indication of the voltage measured on the input in volts
Status of analog input 1
Available in technology function:
Unit of
V
measurement
D/A monitor output
possible
Remark:
Analog input 1
Analog input on plug X11/10 and X11/2
Indication of the voltage measured on the input in volts
Status of encoder input 0 (5V)
Available in technology function:
I11 T11 192-120101 N6 - March 2004
D/A monitor: measurement unit
of the reference value
User level
D/A monitor: measurement unit
of the reference value
User level
D/A monitor: measurement unit
of the reference value
User level
D/A monitor: measurement unit
of the reference value
User level
D/A monitor: measurement unit
of the reference value
-
Object 688.13
T11, T30, T40
advanced
-
Object 688.14
T10, T11, T30, T40
advanced
-
Object 685.3
T10, T11, T30, T40
standard
10V
Object 685.4
T10, T11, T30, T40
standard
10V
Object 680.10
T10, T11, T30, T40