Speeds - Parker Compax3 Series Operating Instructions Manual

Parker EME
6.4

Speeds

Available in technology function:
Unit of
Unit
measurement
D/A monitor output
possible
Remark:
Stated in user units, continuous position
Status actual position without absolute reference
Available in technology function:
Unit of
Unit
measurement
D/A monitor output
possible
Remark:
Stated in user units, continuous position
Status target speed of setpoint encoder
Available in technology function:
Unit of
Unit/s
measurement
D/A monitor output
possible
Remark:
Target value according to the fine interpolator
Status target speed controller input
Available in technology function:
Unit of
Unit/s
measurement
D/A monitor output
possible
Remark:
Nominal speed
Target speed value on the controller input including feed forward
Status actual speed filtered
Available in technology function:
Unit of
Unit/s
measurement
D/A monitor output
possible
Remark:
Actual speed filtered
Status actual speed unfiltered
Available in technology function:
Unit of
Unit/s
measurement
D/A monitor output
possible
Remark:
Status control deviation of speed
Available in technology function:
Unit of
Unit/s
measurement
I11 T11 192-120101 N6 - March 2004
User level
D/A monitor: measurement unit of
the reference value
User level
D/A monitor: measurement unit of
the reference value
User level
D/A monitor: measurement unit of
the reference value
User level
D/A monitor: measurement unit of
the reference value
User level
D/A monitor: measurement unit of
the reference value
User level
D/A monitor: measurement unit of
the reference value
User level
Status values
T11, T30, T40
advanced
Revolutions
Object 680.13
T11, T30, T40
advanced
Revolutions
Object 681.4
T10, T11, T30, T40
standard
Rev/s
Object 681.10
T10, T11, T30, T40
standard
Rev/s
Object 681.9
T10, T11, T30, T40
standard
Rev/s
Object 681.5
T10, T11, T30, T40
advanced
Rev/s
Object 681.6
T10, T11, T30, T40
standard
85