C3 Motormanager: Configuration Of Almost Any Motors; C3 Iec61131-3 - Debugger; Codesys - Iec61131-3 - Development Tool; Cameditor: Cam Creation For C3 T40 - Parker Compax3 Series Operating Instructions Manual

Parker EME
1.3.2.2
1.3.2.3
1.3.2.4
1.3.2.5
1.3.3.

Complements / corrections in manual and online help

C3 MotorManager: configuration of almost any motors

New:
Integration of distance coded feedback systems
!
Export / Import of user defined (customer's) motor
!
Calibration of commutation also for linear motors with small travel path
!
Changes
Linear motors with brakes can be configured
!
Calculation of the recommended number of poles was corrected
!
Calibration of SinCos motors was corrected
!
The minimum moment of inertia was reduced from 10kgmm
!
Configuration of rotatory motors with analog hall sensors was completed
!

C3 IEC61131-3 - Debugger

Forcing of the inputs for T30 and T40 is possible.

CoDeSys - IEC61131-3 - development tool

New CoDeSys version 2.3.2.6

CamEditor: cam creation for C3 T40

-
New structure of the manual:
All technology functions are described in a help.
!
Manuals (PDF files) have a new structure:
!
I10 T10 manual
!
I11 T11 manual
!
I20 T11 manual
!
I21 T11 manual
!
A single manual for all devices programmable according to IEC
!
(I11 T30, I20 T30, T21 T30, I11 T40, I20 T40, I21 T40)
The assignment of the respective chapters is indicated.
I11 T11 192-120101 N6 - March 2004
Introduction
to 1kgmm
2 2
11