Eam06 Terminal Block For Inputs And Outputs - Parker Compax3 Series Operating Instructions Manual

Parker EME
8.8

EAM06 terminal block for inputs and outputs

The terminal block EAM06/.. can be used to route the Compax3 plug connector
X11 or X12 for further wiring to a terminal strip and to a Sub-D plug connector.
Via a supporting rail (Design:
a mounting rail in the control cabinet.
EAM06/ is available in2 variants:
EAM06/01: terminal block for X11, X12 without luminous indicator
!
EAM06/02: terminal block for X12 with luminous indicator
!
Corresponding connecting cables EAM06 - Compax3 are available:
From X11 - EAM06/01: SSK23/..
!
From X12 - EAM06/xx: SSK24/..
!
EAM6/01: terminal block without luminous indicator for X11 or X12
I11 T11 192-120101 N6 - March 2004
or ) the terminal block can be installed on
Compax3 Accessories
131