Compax3 I11 T11: Positioning Via Digital I/Os - Parker Compax3 Series Operating Instructions Manual

Parker EME
2. Compax3 I11 T11: Positioning via
digital I/Os
Model / standards /
auxiliary material
Due to its high functionality, the Positioning version of Compax3 forms an ideal
basis for many applications in high-performance motion automation.
Up to 31 motion profiles (target position, speed, acceleration, retardation, jerk) can
be programmed with the PC software. Positioning is triggered either via the parallel
interface (digital inputs) as single positioning or as positioning sequence. For the
positioning sequence the following motion profile is triggered by each START. The
number of repetitions can be specified for each motion profile.
High-performance control technology and openness for various sender systems
are fundamental requirements for a fast and high-quality automation of movement.
The structure and size of the device are of considerable importance. Powerful
electronics is an important feature which made it possible to manufacture the
Compax3 so small and compact. All connectors are located on the front of the
Compax3.
Internal mains filters permit connection of motor cables up to a certain length
without requiring additional measures. EMC compatibility is within the limits set by
EN 61800-3, Class A. The Compax3 is CE-conform.
The intuitive user interface familiar from many applications, together with the
oscilloscope function, wizards and online help, simplifies making and modifying
settings via the PC.
The optional Operator control module (BDM01/01 (see on page 130 )) for
Compax3 makes it possible to exchange devices quickly without the need for a PC.
I11 T11 192-120101 N6 - March 2004

Compax3 I11 T11: Positioning via digital I/Os

17