Currents - Parker Compax3 Series Operating Instructions Manual

Parker EME
6.5

Currents

Status of effective target current (torque forming)
Available in technology function:
Unit of
mA
measurement
D/A monitor output
possible
Remark:
Effective target current (torque forming)
Cross-flow target value including current and jerk feed forward
Status of effective actual current (torque forming)
Available in technology function:
Unit of
mA
measurement
D/A monitor output
possible
Remark:
Effective actual current (torque forming), actual value after filter
Status of control deviation of effective current
Available in technology function:
Unit of
mA
measurement
D/A monitor output
possible
Remark:
Control deviation of effective current (torque forming)
Status of voltage control signal
Available in technology function:
Unit of
n/a
measurement
D/A monitor output
not possible
Remark:
Control signal of current controller (torque forming)
0.577 correspond to full range (Terminal voltage=DC bus voltage)
Status of current phase U
Available in technology function:
Unit of
mA
measurement
D/A monitor output
not possible
Remark:
Phase current U, Output as peak value
Actual value after oversampling
Status of current phase V
Available in technology function:
Unit of
mA
measurement
I11 T11 192-120101 N6 - March 2004
User level
D/A monitor: measurement unit
of the reference value
User level
D/A monitor: measurement unit
of the reference value
User level
D/A monitor: measurement unit
of the reference value
User level
D/A monitor: measurement unit
of the reference value
User level
D/A monitor: measurement unit
of the reference value
User level
Status values
Object 688.1
T10, T11, T30, T40
standard
O
Object 688.2
T10, T11, T30, T40
standard
O
Object 688.8
T10, T11, T30, T40
advanced
O
Object 688.11
T10, T11, T30, T40
advanced
-
Object 688.9
T10, T11, T30, T40
advanced
-
Object 688.10
T10, T11, T30, T40
advanced
87