Power Supply Plug X1 For 400 Vac Devices; Power Supply Plug X1 For 400Vac Devices; Ballast Resistor / High Voltage Supply Plug X2 For 230Vac Devices; Ballast Resistor / High Voltage Supply Plug X2 For 230Vac Devices - Parker Compax3 Series Operating Instructions Manual

Compax3 device description

Power supply plug X1 for 400 VAC devices

3.1.3. Power supply plug X1 for 400 VAC devices
3.1.4. Ballast resistor / high voltage supply plug X2 for 230VAC
devices
22
PIN Description
1 L1
2 L2
3 L3
4 PE
Mains connection Compax3 Sxxx V4
Controller type
Mains voltage
Rated input current
Maximum fuse rating per
device
Always switch devices off before wiring them!
Dangerous voltages are still present until 5 minutes after
switching off the power supply!
PIN Description
1 + Ballast resistor
2 - Ballast resistor
3 PE
4 + DC high voltage supply
5 - DC high voltage supply
Caution! The connector assignment of X2 is changed!
Please note the screen printing on the front plate of the
device: this is valid
I11 T11 192-120101 N6 - March 2004
S038 V4 S075 V4
Three-phase 3*400VAC
80-480 VAC+10% / 50-60 Hz
6Aeff 10 Aeff
10A (automatic 16 A (automatic circuit
circuit breaker breaker K)
K)
S150 V4 S300 V4
16Aeff 22Aeff
25A (automatic
circuit breaker
K)