Output Wiring Of Digital Outputs; Resolver / Feedback (Connector X13); Resolver / Feedback (Plug X13) - Parker Compax3 Series Operating Instructions Manual

Parker EME
3.1.10.2

3.1.11. Resolver / Feedback (connector X13)

The circuit example is valid for all digital inputs!
F1: Delayed action fuse
F2: Quick action electronic fuse; can be reset by switching the 24VDC supply off
and on again.

Output wiring of digital outputs

F1 F2
24V X12/1
X4/1
X12/11
X12/2
Ω
18.2K
X4/2
0V
X12/15
The circuit example is valid for all digital outputs!
The outputs are short circuit proof; a short circuit generates an error.
F1: Delayed action fuse
F2: Quick action electronic fuse; can be reset by switching the 24VDC supply off
and on again.
PIN Feedback /X13
X13
High Density /Sub D (dependent on the Feedback Module)
Resolver (F10)
1 res.
2 res.
3 GND
4 REFres+
5 +5V (for temperature sensor)
6 CLKfbk
7 SIN-
8 SIN+
9 CLKfbk/
10 Tmot
11 COS-
12 COS+
13 res.
14 res.
15 REFres-
I11 T11 192-120101 N6 - March 2004
SPS/
PLC
SinCos (F11) Direct drives (F12)
res. Sense -
res. Sense +
GND Hall1
Vcc (+8V) Vcc (+5V) (controlled on the encoder
side) max. 200mA load
+5V (for temperature and hall
sensors)
CLKfbk Hall2
SIN- SIN- / A- (Encoder)
SIN+ SIN+ / A+ (Encoder)
CLKfbk/ Hall3
Tmot Tmot
COS- COS- / B- (Encoder)
COS+ COS+ / B+ (Encoder)
DATAfbk N+
DATAfbk/ N-
GND (Vcc) GND (Vcc)
Compax3 device description
29