When Installation Is Completed Normally - Mitsubishi Electric MELSEC SW1DNC-CCIEF-B User Manual

When installation is completed normally

When the installation is completed normally, the following utilities are registered.
Utility
When the installation is completed normally, the utilities shown below are registered in the "Start"
*1 [Start screen]  [All apps] or [Start]  [All Programs]
Folder Name
[MELSEC] CC IE Field Utility (Board)
*2
 [CC IE Field Board]
CC IE Field Board Program Sample
CC IE Field Board Manual
[MELSEC] Device Monitor Utility (Board)
MELSEC Data Link Library Reference
Manual (Board)
*2 It is displayed when using Windows 7 or Windows Server 2008 R2.
*3 When the MELSEC Data Link Function HELP and a manual are registered both, refer to the manual.
Name
MELSEC Data Link Library Reference Manual
(Board)
MELSEC Data Link Library Reference Manual
MELSEC Data Link Function HELP
• In order to view the manuals, Adobe Reader is required. Adobe Reader can be downloaded from the Adobe
Systems Incorporated web site.
• When using 64-bit version operating system, the icon may not be displayed even when Adobe Reader is
installed.
MELSEC Data Link Library
MELSEC data link library is used for the following software packages in common. When the utilities are installed on the same
personal computer, the newer MELSEC data link library of the software package is enabled.
• SW0DNC-MNETH-B
• SW1DNC-CCBD2-B
• SW1DNC-MNETG-B
• SW1DNC-CCIEF-B
Driver
When installing the board on the personal computer after the installation of the software package, the driver is installed
automatically.
When the driver installation is completed normally, the following driver is displayed on the Device Manager screen of
Windows.
Device name
MELSEC CC-Link IE Field Device
Service application
To prevent a personal computer from entering the power save mode (hibernate, sleep), MELSECPowerManager is installed
automatically.
For details of MELSECPowerManager, refer to the following section.
Page 231 MELSECPowerManager
Description
Starts CC IE Field Utility.
It is a utility to set boards and display the status.
A folder in which sample programs are stored.
Displays this manual.
Starts Device Monitor Utility.
It is a utility to monitor devices and change the current value.
Displays MELSEC Data Link Library Reference Manual.
*3
SW0DNC-MNETH-B SW1DNC-CCBD2-B
27D or later 1.15R or later
23Z to 26C 1.11M to 1.14Q
22Y or earlier 1.10L or earlier
Driver name
MELSEC CC-Link IE Field Controller
6 INSTALLING AND UNINSTALLING SOFTWARE PACKAGES

*1
of Windows
SW1DNC-MNETG-B SW1DNC-CCIEF-B
1.17T or later 1.06G or later
1.12N to 1.16S 1.02C to 1.05F

1.11M or earlier
6.2 Installation
.
6
81