• Setting for stations that do not perform transient transmission to other networks
Routing parameters are not required for stations that do not perform transient transmission to other
networks; however, setting the same routing parameters to all stations is recommended.
Note that routing parameters need not to be set for stations for which routing parameters are not available
(such as a station including a head module). The station communicates with other networks according to
routing parameters set to the master station.
Network No.
(Relay station)
It is recommended to set the same routing parameters as
and
can communicate by the same routing parameters,
since they pass through the same relay station.
Station which does not perform transient transmission
Network No.
for
.
10 SETTING PARAMETERS
10.2 Setting Network Parameter
10
111