Appendix 14
MELSECPowerManager is a service application which monitors the Windows Power Options settings every 30 seconds to
prevent the personal computer from entering the power save mode (hibernate, sleep) or the fast startup function.
MELSECPowerManager is applicable for the following operating systems.
• Windows 10, Windows Server 2016, Windows Server 2019
• Windows 8.1, Windows Server 2012 R2
• Windows 8, Windows Server 2012
• Windows 7, Windows Server 2008 R2
When a personal computer is set to enter the power save mode (hibernate, sleep) or the fast startup function is enabled, the
following message is displayed and the setting is changed by MELSECPowerManager.
Installing MELSECPowerManager
MELSECPowerManager is installed automatically when the software package is installed to a personal computer.
The operation starts after the OS is restarted.
Uninstalling MELSECPowerManager
MELSECPowerManager is uninstalled automatically when the software package is uninstalled.
However, it is not uninstalled when another software package of MELSEC interface board is installed to the personal
computer. Uninstall all software packages for MELSEC interface board installed on the personal computer to uninstall
MELSECPowerManager.
Checking MELSECPowerManager
The following explains how to check the installation and operating status of MELSECPowerManager.
The following is a setting example when using Windows 7.
Operating procedure
MELSECPowerManager
1.
Open [Control Panel], and select [System and Security].
Appendix 14 MELSECPowerManager
A
APPX
231