Chapter 11 Operating Board Online; Setting Board Channel Numbers - Mitsubishi Electric MELSEC SW1DNC-CCIEF-B User Manual

11
OPERATING BOARD ONLINE
This chapter explains a method for operating a board online using CC IE Field Utility.
11.1

Setting Board Channel Numbers

This section explains a method for checking/setting board channel numbers.
Window
[Online]  [Channel No. Setting]
Operating procedure
1.
Set the items on the screen.
Item
Channel No. Current Value
LED
Channel No. Setting Value
2.
Click the [End] button.
"Channel No. Setting Value" is set to the board.
181 is set for the board channel number as a factory default.
When using two or more boards in a single personal computer, set channel numbers not to overlap.
11 OPERATING BOARD ONLINE
112
11.1 Setting Board Channel Numbers
Description
Display current channel numbers of each board.
Display LED status of each board.
• The status is displayed as shown below according to the current channel number while opening the "Channel No.
Setting" screen.
<181> <182>
Set the channel number to be changed.
<183> <184>