Setting Network Parameter - Mitsubishi Electric MELSEC SW1DNC-CCIEF-B User Manual

10.2

Setting Network Parameter

Set the network number, station number, and other parameters for the CC-Link IE Field Network board.
Window
[View]  [Network Parameter]
Operating procedure
1.
Set the items on the screen.
Item
Network setting Network Type
Channel No.
Network No.
Total Stations
Station No.
Mode
Network Configuration Setting
Network Operation Setting
Event Setting
Driver Setting
Target Setting
[Routing Parameters] button
[Check] button
2.
Click the [End] button.
Description
Select the network type. (Page 100 Network type and mode)
Select the channel number.
Set the network number.
Setting range: 1 to 239
Set the total number of stations.
Setting range: 1 to 120
Set the station number of the board.
Setting range: Fixed to 0 for a master station, 1 to 120 for a local station
Select the mode. (Page 100 Network type and mode)
Display the "Network Configuration Setting" screen. (Page 101 Network configuration
setting)
Display the "Network Operation Setting" screen. (Page 104 Network operation setting)
Display the "Event Setting" screen. (Page 104 Event setting)
Display the "Driver Setting" screen. (Page 106 Driver setting)
Display the "Target Setting" screen. (Page 107 Target setting)
Displays the "CC IE Field Routing Information Setting" screen. (Page 108 Routing
parameters)
Checks whether the settings are correct.
10 SETTING PARAMETERS
10.2 Setting Network Parameter
10
99