CONSIDERATIONS FOR USE
Interlink transfer and routing functions
CC-Link IE Field Network board cannot be used as a relay station for the interlink transfer function or the routing function.
To use these functions, set a network module as a relay station.
Driver installation and updating
The consistency between the driver and utility cannot be identified, and CC-Link IE Field Network board may not operate
properly.
Do not install or update the driver other than the method written in the troubleshooting.
Page 141 TROUBLESHOOTING
INTRODUCTION
Thank you for purchasing the Mitsubishi Electric network interface boards.
This manual describes the required system configuration, specifications, operating procedure, functions, and troubleshooting
of the relevant products listed below.
Before using this product, please read this manual and the related manuals carefully and develop familiarity with the functions
and performance of the CC-Link IE Field Network interface board to handle the product correctly.
Please make sure that the end users read this manual.
Relevant products
Q80BD-J71GF11-T2, Q81BD-J71GF11-T2
6