Mitsubishi Electric MELSEC SW1DNC-CCIEF-B User Manual page 122

Displayed items
: Diagnosed, : Diagnosed with restrictions, : Not diagnosed
Item
Select Diagnostics Destination
Monitor Status
Network Status, network
configuration, Legends
Data link unperformed
Selected Station
Communication Status
Monitor
Operation Test
Information Confirmation/
Set
• Starting from the "Board Diagnostics" screen
CC-Link IE Field Network diagnostics can also be started from the "Board Diagnostics" screen. (Page
117 Diagnosing Board)
13 DIAGNOSING BOARD STATUS
120
13.2 Diagnosing CC-Link IE Field Network
Diagnostics target
Master
station



Display of network
configuration and error
status

Display of disconnected
cable and disconnected
station

Disconnected station
status monitor

Display of selected station
status and error details
Slave station number 
setting
(Only for slave stations
whose number has not
been set.)
Communication Test 

Cable Test

Link Start/Stop

Network Event History

Reserved Station Function
Enable

Temporary Error Invalid
Station Setting/Restore
Restrictions
Local
station
 
 
 

 

The selected station status and
error details are not displayed
when using a module which is
not supported by the selected
station communication status
monitor function of CC IE Field
Utility.
 
 
 

For a local station, this function
can only be performed on an
own station.

Events that can be collected
differ according to the station
type.

For a local station, reserved
stations/temporary error invalid
stations can only be displayed.

Reference
Page 122 Select diagnostics
target
Page 122 Monitor status
Page 122 Network status
Page 123 Legends
Page 124 Network
configuration
Page 127 Disconnected
station status monitor
Page 127 Selected station
communication status
monitor
Page 129 Communication
test
Page 130 Cable test
Page 131 Link start/stop
Page 132 Network event
history
Page 134 Reserved station
function enable
Page 135 Enable/Disable
ignore station errors